Self aligning roller bearing 23180RK-H3180-JTEKT

380 380 650 650 200 200

Part number : 23180RK-H3180-JTEKT

JTEKT

Description

The Self Aligning Roller Bearing, known as 23180RK-H3180-JTEKT JTEKT, has an inner diameter of 380 mm, an outer diameter of 650 mm and a thickness of 200 mm.

N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Description

The Self Aligning Roller Bearing, known as 23180RK-H3180-JTEKT JTEKT, has an inner diameter of 380 mm, an outer diameter of 650 mm and a thickness of 200 mm.

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

TECHNICAL DATA
  • BRAND
  • N° EAN13
    3616060792419
  • INSIDE DIAMETER
    380  MM
  • INSIDE DIAMETER
    14.961"
  • OUTSIDE DIAMETER
    650  MM
  • OUTSIDE DIAMETER
    25.591"
  • THICKNESS
    200  MM
  • THICKNESS
    7.874"
  • LIMITING SPEED
    390  RPM
  • DYNAMIC LOAD
    4730  KN
  • STATIC LOAD
    7780  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 23180RK-H3180-JTEKT JTEKT, has an inner diameter of 380 mm, an outer diameter of 650 mm and a thickness of 200 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter "K" in the reference.

What does the letter "K" mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS