LOG IN CART BUSINESS SOLUTIONS
23164RHAK-AH3164-JTEKT
JTEKT

Self aligning roller bearing 23164RHAK-AH3164-JTEKT

300 300 540 540 176 176

Part number : 23164RHAK-AH3164-JTEKT

JTEKT
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23164RHAK-AH3164-JTEKT JTEKT, has an inner diameter of 300 mm, an outer diameter of 540 mm and a thickness of 176 mm.

N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23164RHAK-AH3164-JTEKT JTEKT, has an inner diameter of 300 mm, an outer diameter of 540 mm and a thickness of 176 mm.

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
TECHNICAL DATA
  • BRAND
    JTEKT
  • N° EAN13
    3616060796042
  • INSIDE DIAMETER
    300  MM
  • INSIDE DIAMETER
    11.811"
  • OUTSIDE DIAMETER
    540  MM
  • OUTSIDE DIAMETER
    21.26"
  • THICKNESS
    176  MM
  • THICKNESS
    6.929"
  • LIMITING SPEED
    530  RPM
  • DYNAMIC LOAD
    4040  KN
  • STATIC LOAD
    5960  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 23164RHAK-AH3164-JTEKT JTEKT, has an inner diameter of 300 mm, an outer diameter of 540 mm and a thickness of 176 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot