LOG IN CART BUSINESS SOLUTIONS
23130-K-C3-W33
GEN

Self aligning roller bearing 23130-K-C3-W33

150 150 250 250 80 80

Part number : 23130-K-C3-W33

GEN
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23130-K-C3-W33 Generic, has an inner diameter of 150 mm, an outer diameter of 250 mm and a thickness of 80 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23130-K-C3-W33 Generic, has an inner diameter of 150 mm, an outer diameter of 250 mm and a thickness of 80 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
TECHNICAL DATA
  • BRAND
    GEN
  • INSIDE DIAMETER
    150  MM
  • INSIDE DIAMETER
    5.906"
  • OUTSIDE DIAMETER
    250  MM
  • OUTSIDE DIAMETER
    9.843"
  • THICKNESS
    80  MM
  • THICKNESS
    3.15"
  • LIMITING SPEED
    1400  RPM
  • DYNAMIC LOAD
    725000  KN
  • STATIC LOAD
    1200000  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 23130-K-C3-W33 Generic, has an inner diameter of 150 mm, an outer diameter of 250 mm and a thickness of 80 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot