Self aligning roller bearing 22328-CCK-C3W33-SKF

140 140 300 300 102 102

Part number : 22328-CCK-C3W33-SKF

SKF

Description

The Self Aligning Roller Bearing, known as 22328-CCK-C3W33-SKF SKF, has an inner diameter of 140 mm, an outer diameter of 300 mm and a thickness of 102 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Description

The Self Aligning Roller Bearing, known as 22328-CCK-C3W33-SKF SKF, has an inner diameter of 140 mm, an outer diameter of 300 mm and a thickness of 102 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

TECHNICAL DATA
  • INSIDE DIAMETER
    140  MM
  • INSIDE DIAMETER
    5.512"
  • OUTSIDE DIAMETER
    300  MM
  • OUTSIDE DIAMETER
    11.811"
  • THICKNESS
    102  MM
  • THICKNESS
    4.016"
  • LIMITING SPEED
    1700  RPM
  • BRAND
  • DYNAMIC LOAD
    1290000  KN
  • STATIC LOAD
    1560000  KN
  • PACKAGING
    1
  • N° EAN13
    7316576602344
Description

The Self Aligning Roller Bearing, known as 22328-CCK-C3W33-SKF SKF, has an inner diameter of 140 mm, an outer diameter of 300 mm and a thickness of 102 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter "K" in the reference.

What does the letter "K" mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS