LOG IN CART BUSINESS SOLUTIONS
22326-CC-K-C3-W33-SKF
SKF

Self aligning roller bearing 22326-CC-K-C3-W33-SKF

130 130 280 280 93 93

Part number : 22326-CC-K-C3-W33-SKF

SKF
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22326-CC-K-C3-W33-SKF SKF, has an inner diameter of 130 mm, an outer diameter of 280 mm and a thickness of 93 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22326-CC-K-C3-W33-SKF SKF, has an inner diameter of 130 mm, an outer diameter of 280 mm and a thickness of 93 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
TECHNICAL DATA
  • BRAND
    SKF
  • N° EAN13
    7316576600067
  • INSIDE DIAMETER
    130  MM
  • INSIDE DIAMETER
    5.118"
  • OUTSIDE DIAMETER
    280  MM
  • OUTSIDE DIAMETER
    11.024"
  • THICKNESS
    93  MM
  • THICKNESS
    3.661"
  • LIMITING SPEED
    1800  RPM
  • DYNAMIC LOAD
    1120000  KN
  • STATIC LOAD
    1320000  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 22326-CC-K-C3-W33-SKF SKF, has an inner diameter of 130 mm, an outer diameter of 280 mm and a thickness of 93 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot