LOG IN CART BUSINESS SOLUTIONS
22313-E-VA405-SKF
SKF

Self aligning roller bearing 22313-E-VA405-SKF

65 65 140 140 48 48

Part number : 22313-E-VA405-SKF

SKF
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22313-E-VA405-SKF SKF, has an inner diameter of 65 mm, an outer diameter of 140 mm and a thickness of 48 mm.

N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22313-E-VA405-SKF SKF, has an inner diameter of 65 mm, an outer diameter of 140 mm and a thickness of 48 mm.

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
TECHNICAL DATA
  • BRAND
    SKF
  • N° EAN13
    7316570217735
  • INSIDE DIAMETER
    65  MM
  • INSIDE DIAMETER
    2.559"
  • OUTSIDE DIAMETER
    140  MM
  • OUTSIDE DIAMETER
    5.512"
  • THICKNESS
    48  MM
  • THICKNESS
    1.89"
  • LIMITING SPEED
    3800  RPM
  • WEIGHT
    3750  G
  • DYNAMIC LOAD
    357  KN
  • STATIC LOAD
    360  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 22313-E-VA405-SKF SKF, has an inner diameter of 65 mm, an outer diameter of 140 mm and a thickness of 48 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot