LOG IN CART BUSINESS SOLUTIONS
22311RZK-AHX2311-JTEKT
JTEKT

Self aligning roller bearing 22311RZK-AHX2311-JTEKT

50 50 120 120 43 43

Part number : 22311RZK-AHX2311-JTEKT

JTEKT
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22311RZK-AHX2311-JTEKT JTEKT, has an inner diameter of 50 mm, an outer diameter of 120 mm and a thickness of 43 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22311RZK-AHX2311-JTEKT JTEKT, has an inner diameter of 50 mm, an outer diameter of 120 mm and a thickness of 43 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
TECHNICAL DATA
  • BRAND
    JTEKT
  • N° EAN13
    3616060792952
  • INSIDE DIAMETER
    50  MM
  • INSIDE DIAMETER
    1.969"
  • OUTSIDE DIAMETER
    120  MM
  • OUTSIDE DIAMETER
    4.724"
  • THICKNESS
    43  MM
  • THICKNESS
    1.693"
  • LIMITING SPEED
    4100  RPM
  • DYNAMIC LOAD
    296  KN
  • STATIC LOAD
    264  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 22311RZK-AHX2311-JTEKT JTEKT, has an inner diameter of 50 mm, an outer diameter of 120 mm and a thickness of 43 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot