LOG IN CART BUSINESS SOLUTIONS
22264RK-AH2264-JTEKT
JTEKT

Self aligning roller bearing 22264RK-AH2264-JTEKT

300 300 580 580 150 150

Part number : 22264RK-AH2264-JTEKT

JTEKT
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22264RK-AH2264-JTEKT JTEKT, has an inner diameter of 300 mm, an outer diameter of 580 mm and a thickness of 150 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22264RK-AH2264-JTEKT JTEKT, has an inner diameter of 300 mm, an outer diameter of 580 mm and a thickness of 150 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
TECHNICAL DATA
  • BRAND
    JTEKT
  • N° EAN13
    3616060796073
  • INSIDE DIAMETER
    300  MM
  • INSIDE DIAMETER
    11.811"
  • OUTSIDE DIAMETER
    580  MM
  • OUTSIDE DIAMETER
    22.835"
  • THICKNESS
    150  MM
  • THICKNESS
    5.906"
  • LIMITING SPEED
    490  RPM
  • DYNAMIC LOAD
    3420  KN
  • STATIC LOAD
    4540  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 22264RK-AH2264-JTEKT JTEKT, has an inner diameter of 300 mm, an outer diameter of 580 mm and a thickness of 150 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot