LOG IN CART BUSINESS SOLUTIONS
22244-CC-W33-SKF
22244-CC-W33-SKF
SKF

Self aligning roller bearing 22244-CC-W33-SKF

220 220 400 400 108 108

Part number : 22244-CC-W33-SKF

SKF
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22244-CC-W33-SKF SKF, has an inner diameter of 220 mm, an outer diameter of 400 mm and a thickness of 108 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Roller Bearing, known as 22244-CC-W33-SKF SKF, has an inner diameter of 220 mm, an outer diameter of 400 mm and a thickness of 108 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
TECHNICAL DATA
  • BRAND
    SKF
  • N° EAN13
    7316576653209
  • INSIDE DIAMETER
    220  MM
  • INSIDE DIAMETER
    8.661"
  • OUTSIDE DIAMETER
    400  MM
  • OUTSIDE DIAMETER
    15.748"
  • THICKNESS
    108  MM
  • THICKNESS
    4.252"
  • LIMITING SPEED
    1500  RPM
  • DYNAMIC LOAD
    1760000  KN
  • STATIC LOAD
    2360000  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 22244-CC-W33-SKF SKF, has an inner diameter of 220 mm, an outer diameter of 400 mm and a thickness of 108 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot