Self aligning ball bearing 2308-JTEKT

40 40 90 90 33 33

Part number : 2308-JTEKT

JTEKT

Description

The Self Aligning Ball Bearing, known as 2308-JTEKT JTEKT, has an inner diameter of 40 mm, an outer diameter of 90 mm and a thickness of 33 mm.

Your price: $42.51

  8 to 10 days

Quantity Price
5 - 9 $35.42
10 - 24 $28.33
25 - 49 $21.24
50 - inf $14.15
For more information, please request a quote

Added

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Description

The Self Aligning Ball Bearing, known as 2308-JTEKT JTEKT, has an inner diameter of 40 mm, an outer diameter of 90 mm and a thickness of 33 mm.

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

TECHNICAL DATA
  • BRAND
  • N° EAN13
    4549250102905
  • INSIDE DIAMETER
    40  MM
  • INSIDE DIAMETER
    1.575"
  • OUTSIDE DIAMETER
    90  MM
  • OUTSIDE DIAMETER
    3.543"
  • THICKNESS
    33  MM
  • THICKNESS
    1.299"
  • LIMITING SPEED
    6200  RPM
  • DYNAMIC LOAD
    44.9  KN
  • STATIC LOAD
    13.4  KN
  • PACKAGING
    -
Description

The Self Aligning Ball Bearing, known as 2308-JTEKT JTEKT, has an inner diameter of 40 mm, an outer diameter of 90 mm and a thickness of 33 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter "K" in the reference.

What does the letter "K" mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS