LOG IN CART BUSINESS SOLUTIONS
1310-K-TVH-C3-FAG
1310-K-TVH-C3-FAG
1310-K-TVH-C3-FAG
FAG

Self aligning ball bearing 1310-K-TVH-C3-FAG

50 50 110 110 27 27

Part number : 1310-K-TVH-C3-FAG

FAG
Trustpilot

Trustpilot

Description

The Self Aligning Ball Bearing, known as 1310-K-TVH-C3-FAG FAG, has an inner diameter of 50 mm, an outer diameter of 110 mm and a thickness of 27 mm.

N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Ball Bearing, known as 1310-K-TVH-C3-FAG FAG, has an inner diameter of 50 mm, an outer diameter of 110 mm and a thickness of 27 mm.

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
CUSTOMERS ALSO BOUGHT
Sleeves - H310 GEN

SLEEVES H310

45 45 70 70 42 42

$8.07

 
24 parts in stock

V-Ring seal - VA40-NBR GEN

V-RING SEAL VA40-NBR

$2.34

 
50+ parts in stock

TECHNICAL DATA
  • BRAND
    FAG
  • N° EAN13
    3663952346618
  • INSIDE DIAMETER
    50  MM
  • INSIDE DIAMETER
    1.969"
  • OUTSIDE DIAMETER
    110  MM
  • OUTSIDE DIAMETER
    4.331"
  • THICKNESS
    27  MM
  • THICKNESS
    1.063"
  • WEIGHT
    1223  G
  • PACKAGING
    1
Description

The Self Aligning Ball Bearing, known as 1310-K-TVH-C3-FAG FAG, has an inner diameter of 50 mm, an outer diameter of 110 mm and a thickness of 27 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot