LOG IN CART BUSINESS SOLUTIONS
11306-ZEN
11306-ZEN
11306-ZEN
11306-ZEN
ZEN

Self aligning ball bearing 11306-ZEN

30 30 72 72 52 52

Part number : 11306-ZEN

ZEN
Trustpilot

Trustpilot

Description

The Self Aligning Ball Bearing, known as 11306-ZEN ZEN, has an inner diameter of 30 mm, an outer diameter of 72 mm and a thickness of 52 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot

Description

The Self Aligning Ball Bearing, known as 11306-ZEN ZEN, has an inner diameter of 30 mm, an outer diameter of 72 mm and a thickness of 52 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

(646).712.9672

Trustpilot
CUSTOMERS ALSO BOUGHT
Rotary shaft seal - DB-45X72X12-NBR GEN

ROTARY SHAFT SEAL DB-45X72X12-NBR

45 45 72 72 12 12

$8.06

 
39 parts in stock

Deep groove ball bearing - 2305 GEN

DEEP GROOVE BALL BEARING 2305

25 25 62 62 24 24

$18.06

 
4 parts in stock

TECHNICAL DATA
  • BRAND
    ZEN
  • N° EAN13
    3616060504913
  • INSIDE DIAMETER
    30  MM
  • INSIDE DIAMETER
    1.181"
  • OUTSIDE DIAMETER
    72  MM
  • OUTSIDE DIAMETER
    2.835"
  • THICKNESS
    52  MM
  • THICKNESS
    2.047"
  • LIMITING SPEED
    8500  RPM
  • WEIGHT
    619  G
  • DYNAMIC LOAD
    21  KN
  • STATIC LOAD
    6  KN
  • PACKAGING
    1
Description

The Self Aligning Ball Bearing, known as 11306-ZEN ZEN, has an inner diameter of 30 mm, an outer diameter of 72 mm and a thickness of 52 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot